C:\JFlash_MM>jflashmm pxa27x32 eboot.nb0 P 0 PAR

JFLASH Version 5.01.007
COPYRIGHT © 2000 - 2003 Intel Corporation

PLATFORM SELECTION:
Processor= PXA27x
Development System= Mainstone
Data Version= 1.00.001

PXA27x revision ??
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: E01F
Failed to read the Flash ID. Retrying 4 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: E01F
Failed to read the Flash ID. Retrying 3 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: E01F
Failed to read the Flash ID. Retrying 2 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: E01F
Failed to read the Flash ID. Retrying 1 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: E01F
Failed to read the Flash ID. Retrying 0 more times...
Cannot open input file: Flash_e01f_2_32.dat

This program supports flash devices defined by DAT files
contained in the same directory as the executable program.

If the file cannot be opened, there are four possibilities:

1 - The flash device installed is not supported.
2 - The flash device is a licensed product.
3 - The device ID could not be read, resulting in a poorly
constructed filename. The first numeric value in the
filename is the device ID. Verify this value with the
component specification.
4 - The memory bus is not functional. Check all CPLD and FPGA
devices. Make sure that you are using the correct
platform data file.

если MSIPL не шьёт ..... то можете искать флеш или другую плату......
это физическое повреждение области флеша ....
даже jtag ом не получится зальить MSIPL