|
7.7.2009, 0:29
Сообщение
#1
|
|
|
Участник ![]() ![]() Группа: Members Сообщений: 16 Регистрация: 15.6.2009 Пользователь №: 22339 Спасибо сказали: 3 раз(а) Девайс:asus |
Hello, does anybody experienced with P320 jtag connection ?
Since I totally damaged just this BL. Could also someone upload with complete bootloader for this model, please ? Thank you very much |
|
|
![]() |
8.7.2009, 1:31
Сообщение
#2
|
|
|
Участник ![]() ![]() Группа: Members Сообщений: 16 Регистрация: 15.6.2009 Пользователь №: 22339 Спасибо сказали: 3 раз(а) Девайс:asus |
Original version has been WWE (this original version of FW isnt available on Asus web/ftp at all).
I dont remember exact original version by number, but it was quite obsolete. Yes you are right we need to get working bootloader. Otherwise no way further (IMG:style_emoticons/default/sad.gif) Note that once I reflashed to newest version and it worked properly. It read and wrote main image Flash.bin without any problems. Out of GSM.BIN, cauze this old bootloader is able to read GSM.RAW only. Then I upgraded again into latest version with current result. PS : during last flash it also read and wrote "Flash.bin" correctly, even I repeated flash again. But OS failed to start up, it also hangs in same bootloader step as today. When I powered down and I tried next day again, bootloader was unable to read or write Flash.bin anymore. With couple of differences : - no any description about ROM version, (means, missing description of ROM version loaded) - no possible to read/write this image again - missing rom menu under left soft key (ROM 3.5.3_0403). (IMG:style_emoticons/default/dry.gif) Note I tried to use 2x different battery packs. |
|
|
pitka Asus P320 jtag 7.7.2009, 0:29
pitka BL picture attached : 7.7.2009, 22:07
SAXON13 As I see Your bootloader is not dead, so you don... 7.7.2009, 22:56
pitka Yes, I tried to use 3x SD cards capacity (2G, 1G a... 7.7.2009, 23:40
AGC pitka, try to flash original image from asus.com. ... 8.7.2009, 0:28
pitka Thanks AGC,
ja ponimaju po ruskom jazyku. :-) So ... 8.7.2009, 0:44
AGC А вот с бутом беда, отдельно ebootond.nb0 я не вст... 8.7.2009, 1:02
pitka I read this post, too. Same problem as main.
Vers... 8.7.2009, 1:18
AGC Так а что заливать через JTAG, если нет самого бут... 8.7.2009, 1:22
AGC А может просто все дело в карте (MicroSD)? Проверь... 8.7.2009, 2:03
pitka I think that isnt caused by SD cards. As I tested ... 8.7.2009, 2:24
pitka Small update, I was able to go through message ... 9.7.2009, 16:15
Saval У меня сейчас та же проблема, но с другой версией ... 19.7.2009, 12:24
pitka Your issue is far away from main. You have problem... 19.7.2009, 21:15
AGC Цитата(pitka @ 19.7.2009, 22:15) Has anyb... 19.7.2009, 23:13
pitka to AGC :
yes I know that service is one of possibl... 19.7.2009, 23:57
AGC pitka, по JTAG контактам и как их искать - это к S... 20.7.2009, 0:18
pitka Thanks, you are right.
Note that nearly all servic... 20.7.2009, 2:11
warr Hi.
Please please tell :
What is the solution?
... 14.6.2010, 9:14
SAXON13 May be on the top of board in left corner 15-Pin D... 15.6.2010, 1:44
warr QUOTE(SAXON13 @ 14.6.2010, 23:44) May be ... 15.6.2010, 22:59
ersandrej SAXON13 я думаю, что JTAG пины вот здесь, т.к. про... 19.6.2010, 14:25![]() ![]() |
|
Текстовая версия | Сейчас: 1.5.2026, 1:41 |