|
7.7.2009, 0:29
Сообщение
#1
|
|
|
Участник ![]() ![]() Группа: Members Сообщений: 16 Регистрация: 15.6.2009 Пользователь №: 22339 Спасибо сказали: 3 раз(а) Девайс:asus |
Hello, does anybody experienced with P320 jtag connection ?
Since I totally damaged just this BL. Could also someone upload with complete bootloader for this model, please ? Thank you very much |
|
|
![]() |
7.7.2009, 22:56
Сообщение
#2
|
|
|
Проверенный пользователь ![]() ![]() ![]() ![]() Группа: Модератор Сообщений: 937 Регистрация: 4.4.2008 Из: Украина Пользователь №: 1011 Спасибо сказали: 142 раз(а) Девайс:HTC;HP;Samsung... |
As I see Your bootloader is not dead, so you don't need JTAG-repairing
Try to find wright SD image... And are you try to update from PC? Is it hung in boot mode only, or can start OS Try to format your SD in other way, if you format it in FAT, do it on FAT32, chang your SD to lowest capacity |
|
|
7.7.2009, 23:40
Сообщение
#3
|
|
|
Участник ![]() ![]() Группа: Members Сообщений: 16 Регистрация: 15.6.2009 Пользователь №: 22339 Спасибо сказали: 3 раз(а) Девайс:asus |
Yes, I tried to use 3x SD cards capacity (2G, 1G and 256MB) even fat or fat32 but no success.
It hangs in bootloder, see attached picture. (read SD busy) Strange is that I can successfully update EXT_rom.nb0 but no image FLASH.bin. Then sd reader is OK. Seems to me like bootloader image algorithm couldnt validate this FLASH.bin image. Further is missing description for recovery boot (not sure if its really recovery). According this performance, I think that bootloader algorithm is really damaged. I also tried to connect through KITL/rndis but no success. You mentioned "update from PC", could you described which kind of tool ? Cause I dont have any other suitable tool, out of "usbloader". Which is for PXA platform only, but this model is based on TI OMAP. Have you any other tools or way to do it ? Is it possible to dump complete and newest bootloader (then my) in version 3.1 ? Probably ethernet ebootond.nb0 file. |
|
|
pitka Asus P320 jtag 7.7.2009, 0:29
pitka BL picture attached : 7.7.2009, 22:07
AGC pitka, try to flash original image from asus.com. ... 8.7.2009, 0:28
pitka Thanks AGC,
ja ponimaju po ruskom jazyku. :-) So ... 8.7.2009, 0:44
AGC А вот с бутом беда, отдельно ebootond.nb0 я не вст... 8.7.2009, 1:02
pitka I read this post, too. Same problem as main.
Vers... 8.7.2009, 1:18
AGC Так а что заливать через JTAG, если нет самого бут... 8.7.2009, 1:22
pitka Original version has been WWE (this original versi... 8.7.2009, 1:31
AGC А может просто все дело в карте (MicroSD)? Проверь... 8.7.2009, 2:03
pitka I think that isnt caused by SD cards. As I tested ... 8.7.2009, 2:24
pitka Small update, I was able to go through message ... 9.7.2009, 16:15
Saval У меня сейчас та же проблема, но с другой версией ... 19.7.2009, 12:24
pitka Your issue is far away from main. You have problem... 19.7.2009, 21:15
AGC Цитата(pitka @ 19.7.2009, 22:15) Has anyb... 19.7.2009, 23:13
pitka to AGC :
yes I know that service is one of possibl... 19.7.2009, 23:57
AGC pitka, по JTAG контактам и как их искать - это к S... 20.7.2009, 0:18
pitka Thanks, you are right.
Note that nearly all servic... 20.7.2009, 2:11
warr Hi.
Please please tell :
What is the solution?
... 14.6.2010, 9:14
SAXON13 May be on the top of board in left corner 15-Pin D... 15.6.2010, 1:44
warr QUOTE(SAXON13 @ 14.6.2010, 23:44) May be ... 15.6.2010, 22:59
ersandrej SAXON13 я думаю, что JTAG пины вот здесь, т.к. про... 19.6.2010, 14:25![]() ![]() |
|
Текстовая версия | Сейчас: 30.4.2026, 22:19 |