 please help me xda stealth it dead no boot |
|
Здравствуйте, гость ( Вход | Регистрация ) |
|
|
|
|
|
  |
| please help me xda stealth it dead no boot |
 11.7.2008, 21:45
Сообщение
#21
|
|
 PDA2U.RU Team  Группа: Admin Сообщений: 1806 Регистрация: 20.10.2007 Из: Moscow Пользователь №: 11 Спасибо сказали: 172 раз(а) Девайс:Samsung Galaxy Ace  |
Цитата Правильно это как? Правильно - это правильно собрать и подключить кабель. Никто не гарантирует сохранность девайса, если, например, будет превышено напряжение... |
|
 
|
|
12.7.2008, 2:37
Сообщение
#22
|
|
|
Участник Группа: Members Сообщений: 16 Регистрация: 9.7.2008 Пользователь №: 1863 Спасибо сказали: 0 раз(а) Девайс:это поможет |
Цитата(linbin @ 12.7.2008, 1:04)  Thank you mike, my phone access to the factory model (test mode), can not enter bootloader, start-up has been set in the first frame, the last measurement in test mode when the flash Length = 20000000 Checksum = db92a1cd, specific show is all normal, Is the final test results fail, but I am a friend's phone is a normal flash when the test results also fail, be sure this is a normal result, when I connect jatg line, then when God measured flash data into a Length = ffffffff Checksum = ffffffff, about 20 seconds, the phone on a Dead show Abort Exception: CPSR = 80000097-N.z.c.v.q.z.f.t.ABT (17)RO = 17008385.R1 = 00057bdc.R2 = 00000002.R3 = a010f6ce…………> test results can not be displayed on a Dead, but always the case, I do not know where the mistakes, and now the phone However, it is able to boot the old way, will be in the first frame, nothing can do can tell me what had happened? » There will probably JATG point where I would like to thank You flash XDA Steath by JTAG please help me i don't have detail for JTAG. |
|
|
|
|
12.7.2008, 22:30
Сообщение
#23
|
|
|
Новичок Группа: Members Сообщений: 7 Регистрация: 9.7.2008 Пользователь №: 1857 Спасибо сказали: 0 раз(а) Девайс:hello iifhkf |
In fact, I do not know where to contact JATG, my intuition tells me he should be ranked in the two contact one of the big four, the CPU is PAX272 and ATOM, the method should be the same, there are experts who can help please I extracted the XDA STEALTH BOOTLOARD guidance document, I can not find on the web extraction method
|
|
|
|
 15.7.2008, 8:33
Сообщение
#24
|
|
|
Участник Группа: Members Сообщений: 16 Регистрация: 9.7.2008 Пользователь №: 1863 Спасибо сказали: 0 раз(а) Девайс:это поможет |
Dear Sir,
(IMG:http://forum.pda2u.ru/style_emoticons/default/tongue.gif) I test it JTAG it can't work for O2 Stealth . O2 stealth it OEM from Gigabyte. I ask MWG & Gigabyte Commumunication his Reply to me it don't restore O2 stealth. Test point it can't work and suggest me sent to repair service. I think change new mainboard price 200$. (IMG:http://forum.pda2u.ru/style_emoticons/default/blink.gif) |
|
|
|
|
15.7.2008, 9:03
Сообщение
#25
|
|
|
PDA2U.RU Team Группа: Admin Сообщений: 1806 Регистрация: 20.10.2007 Из: Moscow Пользователь №: 11 Спасибо сказали: 172 раз(а) Девайс:Samsung Galaxy Ace |
Such an answer from O2 doesn't wonder.
Manufacturers usually hide this information. If you'll write to O2 about JTAG for Atom Exec - they'll give you the same answer. But the technology of JTAG flashing Atom Exec exists - it's published on our forum. Sorry - I can't help you with JTAG flashing by myself, because I have no experience in it. I'll try to call our experienced reanimators to visit this theme, but I can't promise you anything. |
|
|
|
|
16.7.2008, 10:19
Сообщение
#26
|
|
|
Новичок Группа: Members Сообщений: 7 Регистрация: 9.7.2008 Пользователь №: 1857 Спасибо сказали: 0 раз(а) Девайс:hello iifhkf |
Recently, I had been trying to find out the definition of JATG interface, in accordance with the restoration of O2 ATOM to do the same LTP a jack of O2 STEALTH done a lot of testing, I found several problems, the SIM card in the first row of the left side of the contact , The top of the points that he used to feel very strange, when I received the phone when the TCK or TMS will become the red light, when I received TDO or TDI, the phone will become light yellow, and then when JATG TDI test is the result ifthe 00 billion Is wrong in the end this should be 11111111111 What should be the contact point, there are tests to boot? »
|
|
|
|
|
28.7.2008, 18:52
Сообщение
#27
|
|
|
Новичок Группа: Members Сообщений: 7 Регистрация: 9.7.2008 Пользователь №: 1857 Спасибо сказали: 0 раз(а) Девайс:hello iifhkf |
Help me
|
|
|
|
|
|
Текстовая версия | Сейчас: 26.5.2026, 11:13 |
