 please help me xda stealth it dead no boot |
|
Здравствуйте, гость ( Вход | Регистрация ) |
|
|
|
| please help me xda stealth it dead no boot |
 9.7.2008, 17:09
Сообщение
#1
|
|
|
Участник  Группа: Members Сообщений: 16 Регистрация: 9.7.2008 Пользователь №: 1863 Спасибо сказали: 0 раз(а) Девайс:это поможет  |
My O2 xda stealth it dead no boot after up rom.
please help me xda stealth it dead no boot.[size="3"][/size]
Прикрепленные файлы
|
|
 
|
 |
|
11.7.2008, 21:04
Сообщение
#2
|
|
|
Новичок Группа: Members Сообщений: 7 Регистрация: 9.7.2008 Пользователь №: 1857 Спасибо сказали: 0 раз(а) Девайс:hello iifhkf |
Thank you mike, my phone access to the factory model (test mode), can not enter bootloader, start-up has been set in the first frame, the last measurement in test mode when the flash Length = 20000000 Checksum = db92a1cd, specific show is all normal, Is the final test results fail, but I am a friend's phone is a normal flash when the test results also fail, be sure this is a normal result, when I connect jatg line, then when God measured flash data into a Length = ffffffff Checksum = ffffffff, about 20 seconds, the phone on a Dead show Abort Exception: CPSR = 80000097-N.z.c.v.q.z.f.t.ABT (17)RO = 17008385.R1 = 00057bdc.R2 = 00000002.R3 = a010f6ce…………> test results can not be displayed on a Dead, but always the case, I do not know where the mistakes, and now the phone However, it is able to boot the old way, will be in the first frame, nothing can do can tell me what had happened? » There will probably JATG point where I would like to thank
|
|
|
|
|
12.7.2008, 2:37
Сообщение
#3
|
|
|
Участник Группа: Members Сообщений: 16 Регистрация: 9.7.2008 Пользователь №: 1863 Спасибо сказали: 0 раз(а) Девайс:это поможет |
Цитата(linbin @ 12.7.2008, 1:04)  Thank you mike, my phone access to the factory model (test mode), can not enter bootloader, start-up has been set in the first frame, the last measurement in test mode when the flash Length = 20000000 Checksum = db92a1cd, specific show is all normal, Is the final test results fail, but I am a friend's phone is a normal flash when the test results also fail, be sure this is a normal result, when I connect jatg line, then when God measured flash data into a Length = ffffffff Checksum = ffffffff, about 20 seconds, the phone on a Dead show Abort Exception: CPSR = 80000097-N.z.c.v.q.z.f.t.ABT (17)RO = 17008385.R1 = 00057bdc.R2 = 00000002.R3 = a010f6ce…………> test results can not be displayed on a Dead, but always the case, I do not know where the mistakes, and now the phone However, it is able to boot the old way, will be in the first frame, nothing can do can tell me what had happened? » There will probably JATG point where I would like to thank You flash XDA Steath by JTAG please help me i don't have detail for JTAG. |
|
|
|
thananan27 please help me xda stealth it dead no boot 9.7.2008, 17:09
BigMike ! Skamer - предупреждение за некорректное общение... 9.7.2008, 21:16 BigMike First of all - disassemble the device and make som... 9.7.2008, 21:19 thananan27 please help me xda stealth it dead no boot. i have... 10.7.2008, 3:35 linbin O2 Xda Stealth 10.7.2008, 5:52 linbin O2 Xda Stealth 10.7.2008, 5:56 thananan27 O2 Stealth Back 10.7.2008, 16:39 thananan27 O2 Stealth Front 10.7.2008, 16:41 thananan27 Stealth 10.7.2008, 17:48 BigMike Look at these 2 parallel groups of 5 big round pin... 10.7.2008, 20:33 aidarbest Если удастся восстановить xda stealth, то точно та... 10.7.2008, 21:30 thananan27 Please suggest for detail for JTAG in O2 Stealth.... 11.7.2008, 4:06
SAXON13 Цитата(thananan27 @ 11.7.2008, 4:06) Plea... 11.7.2008, 13:09 thananan27 hey boy I'm not detial TCK , TDI , TMS , TD0 11.7.2008, 13:54 aidarbest Таким перебором, определения контактов jtag, можно... 11.7.2008, 16:02 linbin I also need to
I now have the Xda stealth boot the... 11.7.2008, 16:18 BigMike ЦитатаТаким перебором, определения контактов jtag,... 11.7.2008, 17:25 thananan27 Please suggest for detail for JTAG in O2 Stealth. ... 11.7.2008, 17:41 aidarbest ЦитатаЕсли делать все правильно - то нет.
Правильн... 11.7.2008, 18:13 BigMike ЦитатаПравильно это как?
Правильно - это правильно... 11.7.2008, 21:45 linbin In fact, I do not know where to contact JATG, my i... 12.7.2008, 22:30 thananan27 Dear Sir,
I test it JTAG it can't work for ... 15.7.2008, 8:33 BigMike Such an answer from O2 doesn't wonder.
Manufac... 15.7.2008, 9:03 linbin Recently, I had been trying to find out the defini... 16.7.2008, 10:19 linbin Help me 28.7.2008, 18:52 |
|
Текстовая версия | Сейчас: 26.5.2026, 11:17 |
